• Home
• Auto Repair Book Store
• Do It Yourself
• Trouble Shooting
• Auto Repair Glossary
• Call Vince Ciulla
• Auto Parts
• Auto Repair 101
• Car Care
• Car Clubs
• General Info
• Maintenance & Repair
• Motor Oils
• Product Information
• Repair Shops
• Service Organizations
• Tech Tips
• Tools & Equipment
• Vehicle Systems
• Wheels & Tires

All Info About Auto Repairs Your One Stop Source For All The Information You Need For Your Vehicles.

How Antilock Brake Systems Work

Rear Wheel ABS

PRESSURE MAINTAIN:
During pressure maintain the EBCM energizes the isolation solenoid to stop the flow of fluid from the master cylinder to the rear brakes. The reset switch moves when the difference between the master cylinder line pressure and the rear brake channel pressure becomes great enough. If this happens, it grounds the EBCM logic circuit.

PRESSURE DECREASE:
During pressure decrease the EBCM keeps the isolation solenoid energized and energizes the dump solenoid. The dump valve moves off its seat and fluid under pressure moves into the accumulator. This action reduces rear pipe pressure preventing rear lock-up. The reset switch grounds to tell the EBCM that pressure decrease has taken place.

PRESSURE INCREASE:
During pressure increase the EBCM de-energizes the dump and isolation solenoids. The dump valve reseats and holds the stored fluid in the accumulator. The isolation valve 9pens and allows the fluid from the master cylinder to flow past it and increase pressure to the rear brakes. The reset switch moves back to its original position by spring force. This action signals the EBCM that pressure decrease has ended and driver applied pressure resumes.

SYSTEM SELF-TEST:
When the ignition switch is turned "ON," the EBCM performs a system self-test. It checks its internal and external circuit and performs a function test by cycling the isolation and dump valves. The EBCM then begins its normal operation if no malfunctions are detected.

Brake pedal pulsation and occasional rear tire "chirping" are normal during RWAL operation. The road surface and severity of the braking maneuver determine how much these will occur. Since these systems only control the rear wheels, it is still possible to lock the front wheels during certain severe braking conditions.

SPARE TIRE:
Using the spare tire supplied with the vehicle will not affect the performance of the RWAL or system.

REPLACEMENT TIRE:
Tire size can affect the performance of the RWAL system. Replacement tires must be the same size, load range, and construction on all four wheels.

FREE Newsletter. Sign Up Now!

Help keep this site free.

Copyright (c)2006

Related Articles