All Info About Auto Repairs
Your One Stop Source For All The Information You Need For Your Vehicles.

DIY: Intake Manifold Gasket: GM 3.4 Liter V-6


If you have a General Motors vehicle with a V-6 engine in it, this is something you will want to know how to do and save yourself some major bucks.
More...
» Before You Start
» Part 1 » Part 2
» Part 3 » Part 4
» Part 5 » Part 6
» Part 7 » Part 8
» Part 9 » Part 10

3.4 Liter V-6

Intake Manifold Replacement (Lower)

Removal Procedure:

Important: This engine uses a sequential multiport fuel injection system. Connect the injector wiring harness connectors to their appropriate fuel injector or exhaust emissions and engine performance may be seriously affected.

  1. Disconnect the battery ground (negative) cable.
  2. Remove the upper intake manifold.
  3. Remove the left valve rocker arm cover.
  4. Remove the right valve rocker arm cover.
  5. Disconnect the engine coolant temperature (ECT) wiring harness.
  1. Disconnect and remove the fuel injector and manifold air pressure (MAP) wiring harness.
  1. Remove the fuel pipe clip.
  1. Remove the fuel pipe clip bolt.
More...
» Before You Start           » Part 1       » Part 2
» Part 3      » Part 4       » Part 5       » Part 6
» Part 7       » Part 8       » Part 9       » Part 10

Additional Information provided courtesy of
ALLDATAdiy.com and Warranty Direct
© 2000-2007 Vincent T. Ciulla

FREE Newsletter. Sign Up Now!

Help keep this site free.



Copyright (c)2006




Search All Info About


Related Articles